Product introduction
ALUCORRTRAluminium honeycomb panel is a kind of high-tech and environment-friendly decoration material by closely binding aluminum board and aluminum honeycomb core,which is manufactured by fully automatic production aquipment integrating internationally advanced aviation technology .
Stone aluminum honeycombs is composed by a thin marble/stone sheet and aluminum honeycomb panel,it is mainly applied in building outer wall decoration (especially high-rise building), inner wall suspended ceiling,room door,heart preservation carriage and bath,etc. Stone honeycomb panel is a preferred modern decoration material in deed.
.gif)
1.Characteristics
1) Light weight: If the panel thickness is the same,stone honeycomb penel is much more lighter than traditional stone slab,it can save a lot on the transportation,and it is a good materials for high-strrey buildings.
2) Improvement of strength: The stone panel's bending and shearing strength areobviously improved after composed with aluminum honeycomb panel,so it can reduce the damage rate during transportation and installation.
3) Anti-pollution: Tranditional stone,for example, using wet cement paste,the surface may change colors and appear besmirch in monthes after installation.Stone honeycomb panel has a compact bottom plate and a thin adhesive layer,it can avoid this kind of pollutions.
4) Minimize color variation: Stone honeycomb panels composed by stone slice and honeycomb struture.A piece of traditional stone can be cutted into 2~3pcs slices,and the color and pattern of these slices are almost the same.Thus easier to ensure the consistency of color and patterns when used in large area.
5) Easy to install: As a result of above characteristics,in the process of installation,regardless of the weight,strength,color,stone honeycomb panels improved the safety and efficiency and reduced the cost of installation.
6) Break the restricted area: Tranditional stone can be used in wall,floor,window,table,but the ceiling is a restricted area.Stone honeycomb panels breaked this restriction because it's very light, which is only 1/5 or 1/10 of the tranditional stone.
7) Moisture and sound resistance: Stone honeycomb panel has a hexagonal honeycomb struture,which features heat insulation,moisture and sound resistance.
8) Energy conservation: Because of the heat insulation performace,stone honeycomb panels can reduce electricity and heat energy consumption after installation for interior or exterior.
9) Cost reduction: Stone honeycomb panel is thinner and lighter traditional stone panel,it can save the cost on transportation and installation.For some expensive stones, after composed with honeycomb struture,it will be much more cheaper than traditional stone panels.
2.Specifications
Stone honeycomb panels commonly composed by 3~5mm stone veneer and 10~25mm aluminum honeycomb panel.
For exterior curtain wall: 4-5mm stone + 25mm aluminium honeycombpanel
For interior wall panels: 3-4mm stone + 15mm aluminum honeycomb panel
For interior ceilings: 3-4mm stone + 15mm aluminium honeycomb panel
For floorings: 5-8mm stone + 10~15mm aluminium honeycomb panel
Usually, increased aluminum honeycomb panel's thickness can increase stone honeycomb panel compressive strength while the panel's weight increase little.Due to the restrictions of size of stone slices & aluminum honeycomb panels,processing equipments,the stone honeycomb panels' maximun size is:
marble honeycomb panel: 1500*2500+ mm
granite honeycomb panel: 1200*2500+ mm
3.Comparison list of marble aluminum honeycomb panel with traditional slab
|
Comparison
|
Taditional slab with junction piece
|
Marble aluminum honeycomb panel
|
|
Weight
|
30mm Total thickness 75kg/m²
|
20mm Total thickness 15kg/m²
|
|
Performance
|
Unble to bend
|
Bendble (pressing30mm bent not crack)
|
|
Installation
|
big expenditure (>$45/ m²)
|
small expenditure (<$15/ m²)
|
|
Safety performance
|
Impact resistant cracking against disperse
|
Only with punctate cracking
|
|
Material availability
|
useful material output from one cubic meter waste materials28-38m²
|
80-100m²
|
|
Maximum slab breadth
|
≤600*600mm
|
Able to reach 1600*3200mm
|
